Atmel AVR ATMEGA328P Bootboard
This becomes serial AVRdude programmer too
This offer is for assembled board with the following specifications:-
1) Atmel ATMEGA328P CPU with Arduino Duemilanove bootloader.
2) Superior watchdog timer compatible bootloader.
3) Can be erased and programmed many times.
4) No necessity of toggling any fuse-bit.
5) High specification double side Pb-free PCB with PTH.
6) Rugged PCB for robotic application.
7) 5Volts internal operation (9V external supply).
8) Reverse polarity protected input.
9) With MAX232 or equivalent transceiver.
10) The extension pins are standard and with 2.54mm spacing. We also sell compatible add on board (Shield).
11) 16 MHz crystal.
12) Optimally placed Tx & Rx LEDs. All comm activities can be seen even with prototyping board mounted.
13) Unobstructed reset switch.
14) The Board can power the programming device or vice-versa.
15) Can interface with standard double sided prototyping board having 2.54mm pitch.Not compatible with Arduino shields.
16) Four mounting holes for stable mounting.
17) Can also be programmed by STK500 / AVR ISP (6 pin header).
18) Convertibe to AVRISP to burn Arduino bootloader in other boards and to program other AVR devices.
To help you in your project, we will also add in the following components:-
1) LED 4 Nos
2) Push Button (Small) 4 Nos
3) 10kohm 1/4W resistor 5 Nos (for LDR and NTC pull up)
4) 500ohm 1/4W resistor 5 Nos (for LED )
5) 9V battery connector 1 No
Plus
1) LDR 1 No (Light sensor)
2) NTC 10k 1 No (Temperature sensor)
Please see BootBoards in googlegroups for more information. Interfacing with SD Card, Freescale Force / Pressure sensor, LM35 Temperature sensor, Optocoupler etc.
ATmega328 Specs
32K Self Programmable Flash - 1K bytes EEPROM - 2K Byte SRAM - 6 Channel 10 bit ADC – TWI interface(I2C compatible) – SPI interface – RS232 interface– Analog Comparator – Watchdog Timer – 6 PWM Channel – Real Time Counter – External and Internal Interrupt – Two 8 bit and one 16 bit timer - On board temperature sensor.
Testing Sequence
- Visual inspection.
- Bootloader test.
- Power on test again before shipment.
RoHS
We use Lead(Pb) free PCB and many components like resistors, capacitors, ICs are RoHS. We use RoHS compliant products where ever posssible. However we are unable to mark our product RoHS compliant as we are unable to get RoHS certificate from some suppliers of connectors, switches etc. We are working to make our product RoHS.
Kindly Note:-
· This offer is for 1 Board with Components.
· Preferred payment method is through PayPal for other Payment methods please contact us.
· We ship to Paypal address only.
· In most cases we ship within 24 Hours. In some cases this gets delayed by another 10 hours due to time zone difference or 1 day due to public holiday or weekend.
· We will ship internationally through registered airmail upon receipt of payment. Transit time varies between 1 to 3 weeks.
*****************************************
We manufacture these boards. We pass all the Cost benefit to customers.
*****************************************
